(New) Webinar BiSS - The Open Source BiSS Interface - Well-established and Future-proof
Video duration: 22:25
The open-source BiSS Interface has been implemented by almost 600 licensees all over the world. Recently, it has been extended by the BiSS Safety profile definition for safety-critical applications and its one-cable technology BiSS Line.
It's about time to provide you an overview about the BiSS Interface platform, its applications and latest news.
(New) Webinar iC-RZ/iC-RB Series - Encoder Chips for Safety Applications
Video duration: 42:08
New generations of encoders not only require higher resolutions and smaller designs – they should also be suitable for safety applications. With its new iC-RZ and iC-RB Series encoder chips, iC-Haus introduces a smart solution for this challenge.
Both chip series consist of safe optical twin-scan encoder ICs featuring a redundant safety channel. Due to this innovative twin design, the single-chip system meets the high redundancy requirements of functional safety concepts up to SIL3 or PLe.
(New) Webinar iC-MU Series - High-Resolution Magnetic Absolute Position Encoders
Video duration: 1:01:10
The iC-MU Series is a well-known solution for magnetic absolute position sensing. High-resolution combined with the off-axis scanning principle makes it an unbeatable solution for encoder applications. Regardless of whether for linear or rotary applications, the iC-MU Series is perfectly suited for robotic and motor feedback applications, as well as wherever a hollow shaft robust absolute position sensor is required.
This webinar will give you an introduction to the iC-MU Series’ working principle along with an overview of the features and applications of the various chips. We will show how easy it is to get a rotary demo setup running and also how the iC-MU performs in linear applications. The webinar will conclude with a few tips and tricks from the application support team.
Webinar iC-HS - Battery Buffered Magnetic Absolute Encoders from Gear Wheels or Incremental Scales
Video duration: 32:44
With the new generation of laser drivers from iC-Haus, you can control laser diodes with short pulses ranging from 100 ps up to 5 ns with a resolution of 1 ps. This is possible due to the intelligent chip design with an integrated pulse generator. That way, the so-called gain-switching effect is used technically. One of the core applications is the high precision time-of-flight (ToF) measurement with high pulse power and low average output. This also makes the new laser driver chips attractive for various diagnostic applications in medical technology, for example elastography, a new optoacoustic diagnostic method for tissue-conserving early breast cancer detection that combines ultrasound and optical imaging.
Webinar iC-PVS / iC-TW29 - Battery Buffered Magnetic Absolute Encoders from Gear Wheels or Incremental Scales
Video duration: 58:53
To build magnetic absolute hollow shaft or linear encoders with ferrous gear wheels or incremental magnetic scales, a period counter with battery buffering represents an interesting solution approach. iC-Haus now offers an integrated sensor that makes it easy to create these types of systems. The new iC-PVS combines a 56-bit low-power period counter with a highly configurable Hall array front-end that can be adapted to various magnetic pole pitches or gear tooth modules.
Webinar iC-PZ - Reflective Absolute Encoders for Precise Linear and Hollow Shaft Position Measurements
Video duration: 45:04
High-resolution encoder systems traditionally require precise mechanical alignment – a legacy statement, entirely disproved by iC-Haus’ latest optical reflective encoder chips. Our product experts Goran and Silvan were guiding through hollow shaft and linear applications with the iC-PZ205 during this webinar that had been taken place on March 16th, 2021.
Tech Talk - iC-MCB & iC-BL – Condition Monitoring with Encoders using BiSS
Video duration: 16:31
Condition Monitoring is one of the essential pillars of Industry 4.0. Many machines in the automation technology, e.g. motor feedback systems, already contain encoders for measuring position, speed or acceleration in drives. Our sales and applications engineer Marcel explains how encoders with a BiSS interface can feed back additional sensor data using smart bridge components, such as iC-MCB or the BiSS Line chip iC-BL of iC-Haus.
iC-BL - Bridge Component for Robust One-Cable Technology BiSS Line
Video duration: 04:59
Disturbances in motor feedback systems, e.g. motor commutation noise, make proper transmission of position sensor data more difficult. At the same time, communication protocols have to meet the requirements of reduced wiring, compactness, and costs. Our sales and application engineer Marcel Reuter explains how the one-cable technology BiSS Line enables a robust power and data transmission over only two or four wires.
iC-RB Series - High Resolution Optical Safety Encoder
Video duration: 04:19
The iC-RB Series is a perfect single-chip solution for motor feedback application where safety is required. Our sales and applications engineer Magnus gives a short introduction about our Safety Encoder IC family, the iC-RZ-Series and the new iC-RB Series.
Tech Talk - iC-PZ Series - Smart Position Sensing in Automation and Robotics
Video duration: 06:22
The iC-PZ Series is an excellent choice for integrated absolute encoder solutions in automation and robotics. Our sales and applications engineer Silvan is giving an overview on assembly tolerances, autocalibration features, interfaces and more to emphasize that statement.
iC-HN Series – Small ns-Pulse Laser Drivers
Video duration: 03:53
The iC-HN Series is the latest addition to iC-Haus′s ns-laser driver ICs that allow a fast control of laser diodes with short pulses of down to two nanoseconds and up to 3A laser current. Our sales and applications expert Goran Pandza is demonstrating the iC-HN key features and possibilities of the iC-HN evaluation kit.
iC-TW29 – A Flexible Interpolation IC with Automatic Angle Error Correction
Video duration: 04:09
The new signal processor iC-TW29 converts the sine/cosine signals of magnetic and optical sensors in end-of-shaft or off-axis assembly. In this video, Joachim demonstrates the commissioning of a TMR-based angle sensor by push of a button, for adapting gain and compensating sensor signal and placement errors. Encoder quadrature signals with 10,000 pulses come available, featuring an ultra-low AB edge jitter.
iC-LFH Series - High-Resolution CMOS Line Image Sensors
Video duration: 02:45
The iC-LFH Series CMOS linear image sensors provide high resolution (2000 DPI) with high sensitivity in small, sealed oBGA packages. Thus, they are perfectly suited for use in photoelectric triangulation sensors. Our sales and applications engineer Uwe is demonstrating such a sensor equipped with iC-LFH640.
iC-PZ Series - Setting up a Reflective Absolute Encoder System
Video duration: 03:39
The iC-PZ Series is the latest addition to iC-Haus’ optical reflective encoder iC family. Providing precise measurement results within huge assembly tolerances is one major strength of the high-resolution and absolute iC-PZ Series. Our sales and applications engineer Silvan is demonstrating the ease of installation with the iC-PZ evaluation kit.
iC-Haus Company Introduction
Video duration: 03:55
iC-Haus GmbH is a leading independent German manufacturer of standard iCs (ASSP) and customized ASiC semiconductor solutions. The company has been active in the design, production and sales of application-specific iCs for industrial, automotive and medical technology since 1984 and is represented worldwide. The iC-Haus cell libraries in CMOS, bipolar, and BCD technologies are fully equipped to realize the design of sensor, laser/opto, and actuator ASiCs.
Introduction of iC-PT H-Series and iC-HF
Video duration: 03:04
Joachim Quasdorf presents the new 6-ch. phased array opto encoder IC series iC-PT H in combination with the 6-Ch. RS-422 line driver/receiver iC-HF featuring Encoder Link during the Electronica show 2014.
Encoder Blue? Presentation at SPS/IPC/Drives 2015
Video duration: 14:52
A technical sensor innovation makes an impact: encoder chips utilizing blue light - Encoder Blue. Blue boosts sharpness! This talk explains why and presents innovative sampling chips by iC-Haus that profit as EncoderBlue? motor encoder (iC-PT3325H), absolute encoder (iC-PNH3348) and reflective encoder (iC-PR Series) from the latest technology.
iC-LNG Alignment via USB Microscope
Video duration: 00:53
The iC-LNG is a 16-bit absolute optical encoder device from iC-Haus. This video shows how a simple USB microscope can be used to adjust the alightment of the optical disc to the encoder chip. Note how the alignment markings on the chip are matched up to the disc. Noticable optical disc wabble can be seen with the USB microscope as well.
(this video was provided by iC-Embedded)
Video duration: 00:44
Demonstration of the iC-Haus iC-MP and iC-MH8 Magnetic Encoder Devices. The iC-MP is used as speed control (chip under knob) for the BLDC motor and the iC-MH8 is used as motor feedback (chip under motor shaft) to monitor speed. The iC-MH8 also outputs BLDC commutation signals (U,V,W) to replace internal BLDC hall sensors.
(this video was provided by iC-Embedded)
iC-HT Eval Board: LASER Diode Driver Tutorial (English)
Video duration: 02:02
LASER diode driving can be made easy by utilizing the latest iC-Haus drivers iC-HT and iC-HTP. Follow Marko Hepp's tutorial on the first steps on using the HT1D evaluation board and its specific GUI software.
MB4_1D + MHM1D Eval Board: BiSS Interface Master iC-MB4 Tutorial (English)
Video duration: 02:57
BiSS interface and it′s BiSS interface master iC-MB4 evaluation is easy by utilizing the latest iC-Haus eval boards. Follow Marko Hepp's tutorial on the first steps on using the MB4_1D BiSS master with the MHM1D evaluation board and its specific GUI software.
MB5U + MHM1D Eval Board: BiSS Interface Adapter and BiSS Reader Tutorial (English)
Video duration: 02:07
BiSS interface and it′s evaluation is easy by utilizing the latest iC-Haus BiSS adapter and eval boards. Follow Marko Hepp's tutorial on the first steps on using the MB5U BiSS adapter with the MHM1D evaluation board and the generic BiSS Reader software.
BiSS User Group defines BiSS-LINE - SPS/IPC/Drives 2016 Forum Talk(English)
Video duration: 10:32
With BiSS Line the OPEN SOURCE BiSS Community takes action on the market demand for real One Cable Technologies for motor feedback systems. Follow Marko Hepp's presentation about the new BiSS Line protocol and the implementation details.
BiSS Reader Software F1 - Tutorial 01 Basics (English)
Video duration: 01:55
With iC-Haus' USB adapters and the BiSS Reader software, access to encoder data and details is made easy.This BiSS Reader software tutorial shows the first basic steps with the BiSS Reader software Version F1 or higher. This tutorial uses a BiSS PC USB adapter, a BiSS encoder, and the BiSS Reader PC software.
BiSS Reader Software F1 - Tutorial 02 Fast Reader (English)
Video duration: 01:46
With iC-Haus' USB adapters, the BiSS Reader software enables easy math analysis of encoders' BiSS sensor data. This BiSS Reader software tutorial shows the use of the Math Analysis function of the BiSS Reader software Version F1 or higher. The access to and comparison of BiSS sensors e.g. DUT and REFERENCE with the Math Analysis is shown. This tutorial uses a BiSS PC USB adapter, a BiSS encoder, and the BiSS Reader PC software.
BiSS Reader Software F1 - Tutorial 03 EDS & Error Reporting (English)
Video duration: 01:40
With iC-Haus' USB adapters and the BiSS Reader software, access to encoder data and details is made easy. This BiSS Reader software tutorial shows the EDS & error reporting features of the BiSS Reader software Version F1 or higher. This tutorial uses a BiSS PC USB adapter, a BiSS encoder, and the BiSS Reader PC software.
BiSS Reader Software F1 - Tutorial 04 Hex Editor (English)
Video duration: 01:41
With iC-Haus' USB adapters and the BiSS Reader software, access to encoder data and details is made easy. This BiSS Reader software tutorial shows how the BiSS register map of the encoder can be accessed with the Hex viewer of the BiSS Reader software Version F1 or higher. This tutorial uses a BiSS PC USB adapter, a BiSS encoder, and the BiSS Reader PC software.